9 Criteria for Choosing a Machining Vendor

Bottom Line First
- A failed vendor selection usually blows up in lead time and quality, not price — you hand it off cheap, it arrives late, and when it arrives it will not assemble.
- The criterion for choosing a vendor is not "someone good" but "someone who has made parts like mine."
- The nine items below are things you can check before ordering. If you find out after ordering, you have already paid tuition.
What Actually Happens When You Choose Wrong
Bad scenarios in manufacturing orders follow a predictable pattern. A call one day before the due date saying "it will be ready next week." Parts arrive with tapped holes subtly misplaced, so they cannot be assembled. A rework request answered with "the drawing was ambiguous." What these patterns share is that the problem is not the vendor's skill but the absence of a verification procedure. The items below form a checklist that moves that procedure ahead of the order.
9-Point Pre-Order Checklist
- 1. Do they have a track record with the same process and the same quantity range? — A shop that is good at CNC is not guaranteed to be good at sheet metal, and a mass-production plant does not welcome a single prototype. One question, "Have you made parts similar to this?", filters out a lot.
- 2. Do questions come back in the quote response? — A shop that asks "Do you really need this tolerance?" or "There's no R value here" knows real machining better than one that sends back only a number as soon as you send the drawing. A quote with no questions comes back later as "we made it per the drawing."
- 3. How do they manage lead time? — Is it a verbal promise, and can you learn the progress along the way? In industrial buyer surveys, the top criterion for evaluating a new supplier is not price but on-time delivery record.
- 4. Do inspection standards exist in writing? — Do they inspect dimensions, and can they provide a measurement report on request? "We check it ourselves" and "We'll give you the measured values for key dimensions" are different companies.
- 5. What happens if there is a defect? — Remake or refund, and who decides responsibility? Asking this before ordering may feel awkward, but it is far better than asking after.
- 6. How is the drawing handled? — Where is the drawing sent, and who keeps it? Is an NDA possible? A prototype drawing is itself development information.
- 7. Is the communication channel clear? — Is a specific person named as the contact when a problem arises? At a place where "the owner's phone" is the only channel, everything stops when the owner is busy.
- 8. Can the business be verified as real? — Business registration status (whether suspended or closed) can be looked up for free. One survey found that about half of industrial buyers have experienced the sudden closure of a supplier they were working with. All the more so for prepaid transactions.
- 9. Do you know why a quote is unusually cheap? — Quote variance is naturally large, but the lowest price usually has a reason: material substitution, ignoring tolerances, subcontracting out, or a shop desperate for work. If you ask and the answer is clear, it is a fine deal; if they dodge, the difference was taken out of quality.
Whether You Use a Platform or Deal Directly
This checklist applies equally to direct dealing and to platforms. The difference is who does the verifying for you. A quoting platform like MakeIT standardizes and takes on partner-shop vetting, inspection standards, and defect handling, whereas in direct dealing the buyer must ask the nine items above personally. Either way, any item passed over without verification remains as risk.
Common Mistakes
- Comparing only the quote amounts side by side — Quotes with different inspection and remake terms are not the same product. Compare prices only after aligning the terms.
- Putting off verification because there is slack in the schedule — Problems surface right before the due date. The right use of slack is to agree on inspection standards while you still have it.
- Ordering verbally or by photo with no drawing — In a dispute there is no basis for judgment. Even when you are in a hurry, make and send at least a minimal drawing → General Tolerance ISO 2768
- A large order on the first transaction — No matter how good the reputation, the standard approach is to verify with a small quantity on the first transaction and scale up.
See Also
- What Determines CNC Machining Unit Price
- Which Process Should Make My Part?
- General Tolerance ISO 2768: When a Drawing Has No Tolerance
On MakeIT, upload a drawing and you can see a quote based on vetted partner shops right away. The platform takes on the inspection, remake, and drawing security items in the checklist above.
Have a part to machine?
Upload a drawing to see your quote.



