How to Specify Jig and Fixture Repeatability

A jig is not a product but a tool for making products, so the requirements differ. Fitting once is not enough; it must be the same a thousand times, and appearance does not matter but it must not wear. Here is what to put on the drawing and how to choose material and heat treatment when outsourcing jigs and fixtures.
Jig vs Fixture
- Jig: Guides the tool. Like drill jigs and welding jigs, it determines "where to machine"
- Fixture: Holds the workpiece. Inspection fixtures, assembly fixtures, machining fixtures
For both, the key is the datum surface. A product drawing describes shape, but a jig drawing must state "what is the reference, and how identical must the parts be."
Four Things the Drawing Must Include
| Item | How to write it | What happens without it |
|---|---|---|
| Datum surfaces | Specify A, B, C datums, in the order bottom, then side | The shop picks its own reference and positions drift |
| Positional tolerance | Position, parallelism, and perpendicularity on pin holes and seating faces | Dimensional tolerances alone cannot prevent accumulated error |
| Wear-part material and hardness | Contact areas in S45C (1045 carbon steel) quench and temper (Q&T) or SK. State hardness (HRC) | After a few hundred uses the seating surface can wear and precision drops |
| Pin and bushing specs | Part numbers for standard locating pins, diamond pins, and drill bushings | Nonstandard pins are hard to replace |
Material Selection
| Location | Material | Reason |
|---|---|---|
| Body, base | SS400 (mild steel, similar to ASTM A36), AL6061 (6061 aluminum) | Rigidity. Use 6061 if it must be light |
| Contact and wear areas | S45C heat treated (Q&T); SK or SUJ2 for pins | Hardness. Untreated S45C wears easily |
| Corrosive environment, wash fixtures | SUS304 | Corrosion resistance. Machining cost goes up |
Heat treatment is generally done on the contact areas only, not the whole part. Q&T on the whole part causes distortion and adds finish grinding. Types of heat treatment are covered in Types of Heat Treatment and How to Choose.
Ordering Flow
- Save each part as a STEP file, splitting the assembly into parts: body (milling), pins and bushings (turning), plates (laser)
- Attach one assembly drawing as reference: which pin goes into which hole
- Write parts that get heat treatment or grinding in the finishing field
- If the same jig will be used on every line, order 2 or 3 sets from the start. The setup cost is incurred only once
FAQ
Can you make just one jig?
Yes. A quantity of 1 or 2 is normal for jigs, and production from 1 part is basic work for machining centers and lathes.
How do I source standard pins and bushings?
Specify catalog parts such as MISUMI. If you write the part number on the drawing, the holes are machined to match that standard.
If it wears, do I need to remake the whole jig?
If you design the contact areas as separate parts, you only need to reorder those parts. Separating them at the design stage is the most effective way to save cost.
Summary
A jig drawing needs datum surfaces, positional tolerance, wear-part hardness, and standard pin specs. Use SS400 or 6061 for the body and S45C Q&T for contact areas. Split the parts and upload them as STEP files, and design wear parts to be replaceable.
Have a part to machine?
Upload a drawing to see your quote.



