What Drives FDM, SLA, and SLS Printing Costs?

3D printing cost is the sum of material cost, machine time, supports, post-processing, and setup cost that a print service incurs to produce and deliver one part. Quotes for the same STL file from two providers can differ widely. Sometimes one provider simply quotes high, but the gap usually comes from differences in print process or settings. A 3D printing price includes several items beyond part volume, and the items that drive cost differ by process, so a quote should be judged by identifying which item drove the amount, process by process.
Components of Print Cost
- Material usage: The part's own volume plus the amount of support and infill. For FDM this is filament, for SLA resin, and for SLS powder consumed.
- Machine time: The machine is tied up with the part while it prints. The larger and taller the part and the thinner the layer height, the longer the machine is occupied.
- Supports: Structures that hold up overhanging faces. They use extra material and time, and removing them adds a separate manual task.
- Post-processing: Support removal, washing and post-curing (SLA), depowdering (SLS), and cosmetic work such as sanding and painting. In some cases it takes as much labor as the print time.
- Setup and minimum charge: File review, slicing, and machine preparation are fixed costs incurred even for a small part, so a single small part has a high unit price relative to its volume.
As a result, the smaller the part, the larger the share of setup; the larger the part, the larger the share of material and machine time.
Price Drivers by Process
| Process | Material unit cost | Main price drivers | How to reduce cost |
|---|---|---|---|
| FDM | Lowest | Amount of support, infill percentage, print time from large volume | Lower the infill; lay the part down in an orientation with less support |
| SLA, DLP | High among plastic processes | Part height (layer count), supports, washing and post-curing | Geometry that gets shorter when laid flat; several parts on one plate |
| SLS | High | Powder mass, machine preparation and cooling, build-plate fill rate | Hollowed-out design; nest with other parts |
FDM has cheap material, but a single nozzle draws lines and builds up layers, so print time grows with volume. Also, many overhanging faces increase support, which increases material, time, and removal work together (FDM process details).
Among SLA and DLP machines, those like DLP and LCD that expose an entire layer at once have print time determined by height (layer count) rather than footprint, so putting several parts on the same plate leaves print time almost unchanged. By contrast, with SLA, where a laser traces each cross-section, time grows as cross-sectional area and part count increase. Both types have high resin unit cost and require washing after printing, and most resins need post-curing to reach their full properties (SLA process details).
SLS needs no supports because the surrounding powder holds the part. However, machine preheating, cooling, and powder handling take time, and cost per part varies greatly with how full the build plate is (fill rate). Powder cost in particular is calculated by weight, so a solid part costs more (SLS process details).
How Price Differs by Process Depending on Geometry
The following compares two parts under illustrative assumptions. First, a wide, flat cover printed lying down in SLA is short in height and therefore quick, and FDM also prints it flat on the bed without supports, so the burden is small with either process. Second, a tall housing with a lot of interior void and protrusions generates a lot of support in FDM and SLA, and its height lengthens the time, so SLS, which needs no supports, can be relatively advantageous for this geometry.
In other words, the ranking of processes reverses depending on geometry and quantity. Start with FDM for parts used only to check shape, SLA for smooth surfaces and fine features, and SLS for complex geometry where supports are a problem or for dozens of functional parts. For geometry where it is unclear which is better, get quotes for two processes and compare. The criteria for comparing against CNC machining are in Prototyping: 3D Printing vs CNC.
Designing to Reduce Cost
- Infill and hollowing: In FDM, lowering the infill percentage reduces both material and time; for functional parts under load, set the percentage with strength in mind. In SLA and SLS, changing thick sections to hollow geometry reduces material, but you must include drain holes for the resin or powder to escape.
- Orientation that creates less support: Placing a large flat face toward the bed and changing large protrusions to sloped faces (chamfers) reduces support. Tell the provider in advance about any face that must not carry support marks so they can orient the part to avoid it.
- Batch printing: Placing several parts together on one plate in SLA, or in one build in SLS, lets the parts share setup and machine time. Splitting the same part across several orders adds setup cost to each order, so ordering all at once gives a lower cost per part.
- Layer height: Thinner layers increase the layer count and lengthen the time, so order check-fit parts at standard layer height and specify thin layers only for parts that need surface quality.
What to Include in a Quote Request
- Material and color: State whether it is PLA, ABS, resin, or nylon, and whether a color is specified. Specialty resins can differ greatly in unit price from standard resins.
- Post-processing scope: State whether it is support removal only, or includes sanding, painting, and surface finishing. The quote can differ greatly depending on post-processing scope.
- Quantity: Giving both the quantity needed now and the quantity planned later makes it easier for the provider to plan the layout.
- Purpose: State whether the part is for appearance check, assembly check, or a functional part under load; the process and infill percentage depend on the purpose.
- Critical faces and dimensions: Mark the faces that must not carry support marks and the holes and fit dimensions that must be met.
Frequently Asked Questions
Why is the quote high for a single small part?
Fixed costs such as file review, machine preparation, and post-processing apply regardless of part size. Grouping several copies of the same part, or ordering together with other parts, reduces the burden per part.
Is it possible to print without supports?
It is possible with SLS, where the surrounding powder holds the part, so no supports are needed. FDM and SLA need supports when there are overhanging faces, but changing the print orientation or designing protrusions as sloped faces reduces the amount of support.
Can I request a quote with just an STL file?
Yes. However, you should also state the material, color, post-processing, quantity, and purpose so the quotes you receive can be compared; for missing items, the provider will assume values on its own when quoting.
Summary
For FDM, support and volume drive the price; for SLA, height and post-processing; for SLS, powder usage and fill rate. Reduce cost by adjusting infill, choosing an orientation with less support, and printing in batches, and include the material, color, post-processing, quantity, and purpose in your quote request.
MakeIT's 3D printing quotes are based on STL files, and the available materials are PLA, ABS, resin, and nylon.
Have a part to machine?
Upload a drawing to see your quote.



