SLS spreads a thin layer of powder such as nylon and sinters it with a laser, building parts layer by layer. The unsintered powder around the part acts as a natural support, so complex shapes and even assembled mechanisms can be printed in one go with no separate supports. Strength is comparable to injection-molded parts, so it is also used for low-volume production parts, but the surface is porous and rough and the powder needs cleanup.
SLS 3D Printing (Selective Laser Sintering)
Basics
How it works
A thin layer of fine, flour-like plastic (or metal) powder is spread in a bed, and a high-power laser melts and fuses the powder in the shape of each cross-section of the drawing (sintering). A roller then covers it with fresh powder and the laser fires again. Repeating this thousands of times bakes the 3D shape inside the powder bed in an additive process.
What sets it apart
Unlike FDM or SLA, no separate supports are needed to hold up features in mid-air. The unsintered powder around the part acts as a perfect natural support, so it is the only process that can print an already assembled mechanism, such as a chain or a set of gears, in one piece.
Process characteristics
✔ No support removal and design freedom — there is no risk of damaging the part when removing supports, and complex internal labyrinth structures that supports could not reach (such as conformal cooling channels) can be made precisely.
✔ Mechanical strength at end-use part level — mainly nylon (polyamide) materials are used, with strength, toughness and heat resistance comparable to injection-molded parts. It is most often chosen for low-volume production parts that go straight into the field, beyond prototypes.
✔ Drawbacks (rough surface and powder cleanup) — because fine powder is fused together, the surface is not smooth and has a porous texture. After printing, the leftover unsintered powder must also be removed with high-pressure air.
SLS (Selective Laser Sintering) FAQ
- Q. How does SLS 3D printing work?
- A thin layer of fine plastic (or metal) powder is spread in a bed, and a high-power laser melts and fuses the powder in the shape of each cross-section of the drawing (sintering). Repeating this thousands of times bakes the 3D shape inside the powder.
- Q. Does SLS need supports?
- No. The unsintered powder around the part acts as a perfect natural support, so unlike FDM or SLA no separate supports are needed.
- Q. Can SLS print assembled parts in one go?
- Yes. Because supports are not needed, it is the only process that can print an already assembled mechanism, such as a chain or a set of gears, in one piece. Complex internal labyrinth structures that supports could not reach can also be made precisely.
- Q. Can SLS prints be used as real parts?
- Yes. Mainly nylon (polyamide) materials are used, with strength, toughness and heat resistance comparable to injection-molded parts, so SLS is most often chosen for low-volume production parts that go straight into the field, beyond prototypes.
- Q. What are the drawbacks of SLS prints?
- Because fine powder is fused together, the surface is not smooth and has a porous texture, and the leftover unsintered powder must be removed with high-pressure air after printing.
SLS quote from one drawing
Upload STEP or DWG → instant quote → final quote. Analysis through pricing is automated.
Upload a drawing| TitleSLS | Scale1:4 | Unitmm | |
| FormatA4 | Date2026-03-12 | Proj. | Sheet1/1 |
| Dwg No.MAKEIT-3DP-SLS | Thk12 | RevA | |
Related: 3D printing
FDM
Fused Deposition Modeling
Melted filament built up layer by layer. The lowest-cost prototype printing
SLA
Stereolithography
Photopolymer resin cured with UV light. Precise prototypes with a smooth surface
DLP
Digital Light Processing
A projector cures a whole layer at once. Precise printing faster than SLA
