FDM is an extrusion-based additive process that melts thermoplastic filament through a nozzle and builds parts one layer at a time. It needs no mold, so it suits low volumes and prototypes, but layer lines remain on the surface and strength along the Z axis is weaker. Price depends on print time (infill and layer height), the amount of support and special materials (PC, carbon fiber and so on).
FDM (Fused Deposition Modeling)
Basics
How it works
The principle is exactly that of a hot glue gun. Thermoplastic filament is melted in a hot nozzle and extruded, and the nozzle moves in X and Y along each cross-section of the drawing, stacking the shape one layer at a time. It is an additive manufacturing process.
What sets it apart
Unlike CNC machining, no material is cut away and wasted, and unlike plastic injection molding, no separate mold is needed. With only 3D drawing data, even a single part can be made right away, which makes it ideal for low-volume, high-mix production.
Process characteristics
✔ Design freedom and infill — closed internal structures and honeycomb infill that are hard to make by injection molding or milling are possible. This cuts part weight substantially while keeping the stiffness you need.
✔ No upfront tooling investment (no mold) — there is no mold cost of tens to millions of KRW and no complex CAM setup, so it suits rapid prototyping, where ideas are checked as physical parts early in development.
✔ Drawbacks (surface finish and anisotropy) — because parts are built in layers, contour lines remain on the surface and the finish is rough. The layers are also fused to each other, so under strong force along the Z axis (build direction), parts tend to separate along the layers (anisotropy).
Cost structure
Filament material cost + machine running time (print time) + post-processing labor (support removal and surface sanding)
Key cost drivers
① Print time (a function of infill and layer height)
Machine time matters more than material cost. Whether the interior is filled 100% (infill density) and how thin each layer is (layer height) can change the time several-fold, which feeds straight into the quote.
② Amount of support
Material cannot be laid down in mid-air, so supports must be printed beneath overhangs. More support means more material and print time, plus the labor to remove and clean it up by hand after printing.
③ Special materials
Standard PLA is very cheap, but if you require heat-resistant, high-strength industrial PC (polycarbonate) or carbon-fiber-filled filament, material cost soars and a dedicated, expensive industrial machine is needed, so the price rises sharply.
Problem drawings (review advised)
Fine, complex features hanging in mid-air (excessive overhang)
Drawings with thin features projecting into the air leave few places to put supports, and removing the supports after printing risks damaging the part itself, so normal printing is difficult.
Injection-mold-level precision fit tolerances
In FDM, hot plastic shrinks slightly as it cools, and the nozzle diameter limit (typically 0.4 mm) rounds corners a little. Asking FDM for 0.05 mm precision fit tolerances makes assembly difficult and may require post-processing, so for ultra-precise parts SLA or CNC is the better fit.
Walls thinner than the nozzle diameter (thin walls)
With a 0.4 mm nozzle, a drawing with 0.3 mm or 0.5 mm walls is hard for the printer to print stably in a single line, which can leave tiny holes in the wall or weaken it. For FDM drawings we recommend a wall thickness of at least 1 to 1.2 mm.
FDM (Fused Deposition Modeling) FAQ
- Q. How does FDM 3D printing work?
- Thermoplastic filament is melted in a hot nozzle and extruded, and the nozzle moves in X and Y along each cross-section of the drawing, stacking the shape one layer at a time. The principle is the same as squeezing out hot glue from a glue gun.
- Q. What are the advantages of FDM?
- It can make shapes that are hard to produce by injection molding or milling, such as honeycomb infill, and it can produce even a single part right away from drawing data alone, with no mold cost or complex CAM setup, which suits rapid prototyping.
- Q. What determines FDM cost?
- Machine running (print) time matters more than material cost. Price varies widely with infill density and layer height, the amount of support needed for overhangs, and whether special materials such as PC or carbon fiber are used.
- Q. Which drawings are hard to make with FDM?
- Excessive overhangs that project thinly into the air, 0.05 mm precision fit tolerances, and walls thinner than the nozzle diameter (0.4 mm) are hard to print normally or may come out weak. For ultra-precise parts, SLA or CNC is a better fit.
- Q. What are the drawbacks of FDM prints?
- Because parts are built in layers, contour lines remain on the surface and the finish is rough. The layers are fused to each other, so under force along the Z axis (build direction) parts tend to separate along the layers (anisotropy).
FDM quote from one drawing
Upload STEP or DWG → instant quote → final quote. Analysis through pricing is automated.
Upload a drawing| TitleFDM | Scale1:4 | Unitmm | |
| FormatA4 | Date2026-03-12 | Proj. | Sheet1/1 |
| Dwg No.MAKEIT-3DP-FDM | Thk12 | RevA | |
