DLP cures an entire layer of liquid resin at once with projector light, so print time is the same however many parts are on the build plate as long as the height is the same, which suits volume production of small parts. Resolution is pixel-based, so fine patterns are reproduced very precisely, but the projector's image size limits large parts and voxel (pixel) marks can remain.
DLP 3D Printing (Digital Light Processing)
Basics
How it works
A projector shines an image of each cross-section of the drawing onto the bottom of a vat of liquid photopolymer resin. The whole illuminated area hardens at once, like a stamp, within a very short time, and the part is pulled up one layer at a time to complete the 3D shape in an additive process.
What sets it apart
SLA draws lines with a laser pen; DLP cures a whole surface at once with a projector. Whether you place 1 part or 100 on the build plate, print time is exactly the same as long as the height (Z axis) is the same, which is a big advantage for volume production of small parts.
Process characteristics
✔ High speed regardless of quantity — even with the whole XY plane (floor area) filled, curing one layer takes only a few seconds. Dozens of figurines or dental aligners can be printed at the same time, so productivity is very high.
✔ Ultra-fine detail at the micro-pixel level — precision is set by the projector's pixel resolution, so patterns thinner than a fingerprint or a hair, or the delicate stone settings of jewelry, are reproduced sharply and without smearing.
✔ Drawbacks (size limit and voxel marks) — the projector's image size is physically limited, so large parts are hard to print. Enlarging the image also enlarges the pixels and lowers precision, and on close inspection curved surfaces show faint square pixel marks (stair-stepping).
DLP (Digital Light Processing) FAQ
- Q. How does DLP 3D printing work?
- A projector shines an image of each cross-section of the drawing onto the bottom of a vat of liquid photopolymer resin. The whole illuminated area hardens at once, like a stamp, within a short time, and the part is pulled up one layer at a time.
- Q. What is the difference between DLP and SLA?
- SLA draws and cures lines with a laser pen; DLP cures a whole layer at once with a projector. Whether you place 1 part or 100 on the build plate, print time is the same as long as the height (Z axis) is the same.
- Q. Is DLP good for volume production?
- Yes. Even with the whole XY plane filled, curing one layer takes only a few seconds, so dozens of figurines or dental aligners can be printed at the same time and productivity is very high.
- Q. How precise is DLP?
- Precision is set by the projector's pixel resolution, so patterns thinner than a fingerprint or a hair, and the delicate stone settings of jewelry, can be reproduced sharply and without smearing.
- Q. What are the drawbacks of DLP?
- The projector's image size is physically limited, so large parts are hard to print. Forcing the image larger enlarges the pixels and lowers precision, and curved surfaces can show faint square pixel marks (stair-stepping).
DLP quote from one drawing
Upload STEP or DWG → instant quote → final quote. Analysis through pricing is automated.
Upload a drawing| TitleDLP | Scale1:4 | Unitmm | |
| FormatA4 | Date2026-03-12 | Proj. | Sheet1/1 |
| Dwg No.MAKEIT-3DP-DLP | Thk12 | RevA | |
