본문 바로가기
Anodizing

Anodizing

Anodizing electrochemically oxidizes the aluminum surface to form a hard aluminum oxide layer that is one with the base metal. It suppresses corrosion, provides insulation and allows a wide range of dyed colors, but it applies only to certain metals such as aluminum and titanium, and dimensions grow by the layer thickness, so precision parts need compensation in advance.

Anodizing

Anodizing is a surface treatment that electrochemically oxidizes the surface of aluminum to grow a hard aluminum oxide (Al₂O₃) layer. It improves corrosion resistance and electrical insulation and can add colors such as black, silver and red. It works only on aluminum and titanium, so it cannot be applied to steel or stainless steel.

Basics

How it works

The aluminum part is held on a conductive jig and immersed in an acid solution such as sulfuric acid, and anodic (+) current is applied. The resulting electrochemical reaction combines the aluminum surface with oxygen to form a hard aluminum oxide layer.

What sets it apart

Unlike paint or plating, it does not cover the metal with another substance. The aluminum surface itself oxidizes and becomes one with the base metal. The layer therefore almost never peels or lifts, and the character of the aluminum surface is preserved.

Process characteristics

✔ Longer metal life and electrical insulation — it blocks reaction with oxygen and moisture in the air to suppress corrosion, and turns the conductive aluminum surface into an oxide layer with excellent insulation, preventing shorts in electronic products.

✔ A wide range of colors (standard anodizing) — dye is absorbed into the fine honeycomb-shaped pores formed in the layer, and the pores are then sealed. The aluminum keeps its metallic luster while taking on a wide range of permanent colors.

✔ Drawbacks (material limits and dimensional change) — it cannot be applied to steel, stainless steel or brass, only to certain metals such as aluminum and titanium. As the layer forms, outer dimensions grow by about half the layer thickness (typically 5 to 25 μm), so precision-fit parts need to be compensated in advance.

How much does anodizing cost?

Few shops in Korea publish anodizing prices, so it is hard to get a feel when ordering for the first time. Based on prices published by overseas shops, small orders fall roughly in the following ranges.

Anodizing cost reference ranges (based on published overseas small-batch prices, 2026)

ItemTypical
Cost per part (standard Type II, small qty)approx. KRW 7,000–28,000
Batch setup feeapprox. KRW 100,000–400,000 (heavier per part for small runs)
Hard anodizing (Type III)+50–80% vs standard (Type II)
Color: blackapprox. +30% vs undyed (clear)
Color: red, blue, goldapprox. +30–40% vs undyed
Masking (partial)approx. KRW 20,000–35,000 per area

Actual prices vary with part size, quantity, color and masking. Upload your drawing to see the exact price for your part automatically in about a minute.

Anodizing FAQ

Q. Can anodizing be applied to any metal?
No. It cannot be applied to steel, stainless steel or brass, only to certain metals such as aluminum and titanium.
Q. Do dimensions change after anodizing?
Yes. As the layer forms, outer dimensions grow by about half the layer thickness (typically 5 to 25 μm), so parts that need a precision fit must be compensated in advance.
Q. How is anodizing different from paint or plating?
Paint and plating cover the metal with another substance, while in anodizing the aluminum surface itself oxidizes and becomes one with the base metal. The layer therefore almost never peels or lifts.
Q. Can anodizing add color?
Yes. Dye is absorbed into the fine pores formed as the layer grows, and the pores are then sealed, so the aluminum keeps its metallic luster while taking on a wide range of permanent colors.
Q. Why is anodizing needed?
It blocks reaction with oxygen and moisture in the air to suppress corrosion, and turns the conductive aluminum surface into an oxide layer with excellent insulation to prevent shorts in electronic products.
Q. What should I check when choosing an anodizing shop?
Check three things. (1) Type: which shops can do the work depends on whether you need standard (Type II, 5 to 25 μm) or hard (Type III, 25 to 100 μm). (2) Dimensional compensation: about half the layer thickness grows outward, so for precision-fit parts choose a shop with masking and compensation experience. (3) Lot-to-lot color control: the same specified color can vary between lots (especially on AL7075 (7075 aluminum)), so ask in advance about the color reproduction standard. On MakeIT, upload a drawing to get an instant quote including anodizing in about a minute and be matched with a vetted shop.

Anodizing quote from one drawing

Upload STEP or DWG → instant quote → final quote. Analysis through pricing is automated.

Upload a drawing
TitleAnodizingScale1:4Unitmm
FormatA4Date2026-03-12Proj.Sheet1/1
Dwg No.MAKEIT-POST-ANODIZINGThk12RevA

Related: Finishing

Finishing services

Read more