본문 바로가기
5-axis CNC milling (simultaneous)

5-axis CNC milling (simultaneous)

5-axis CNC milling (simultaneous 5-axis) cuts while the spindle and table continuously rotate and tilt, keeping the tool along the normal direction of the workpiece surface. It produces 3D free-form surfaces with undercuts, such as impellers and turbine blades, in a single setup. Very high equipment prices and CAM and collision-verification labor put the hourly rate at least 3 to 5 times that of ordinary 3-axis, so specifying 5-axis unnecessarily raises cost significantly.

5-axis CNC milling (simultaneous)

Basic concept

How it works

The machine spindle and the table holding the workpiece rotate and tilt continuously, while the sharp tool always holds the normal (perpendicular) direction to the workpiece surface and cuts evenly.

Key difference

It produces, in a single setup, 3D free-form surfaces with undercuts, such as screws, impellers (turbine blades), aircraft propellers and artificial joints. On 3-axis or 3+2-axis machines the toolpath cannot even be generated, or the tool physically cannot reach these features because of the machine structure.

Machining characteristics

✔ Freedom of form — Almost any geometry can be machined. Because the side (flank) of the tool is used as well as the tip to cut surfaces evenly, you get excellent surface finish without the stair-step marks (contour lines) of 3-axis machines.

✔ Minimal tool length and no chatter — The machine tilts itself to the ideal cutting angle, so the shortest, most rigid tool can be used for precision machining of very deep areas without vibration.

✔ Downside (high difficulty and capital burden) — Beyond equipment prices (hundreds of millions to billions of KRW), the labor cost of skilled engineers who can run 5-axis CAM software and manage machine collisions is among the highest in manufacturing.

Cost structure

Hourly rate of very expensive equipment + top-tier CAM engineering (toolpath and collision simulation) + 5-axis fixture / vise setup + actual machine run time

Key cost drivers

① Machine hourly rate

The hourly machine cost is at least 3 to 5 times that of an ordinary 3-axis machine. As machining time grows, the quote rises exponentially. Requiring 5-axis machining on features that don't need it is a leading cause of higher prices.

② CAM programming and crash verification time

Five axes move simultaneously in a tight machine interior, so there is a high risk of collisions between spindle, table and workpiece that could damage expensive equipment. Precise 3D simulation and toolpath optimization to prevent this carry significant software engineering cost.

③ The feed rate paradox

With five axes moving at once and coordinates computed continuously at the micrometer level, the machine controller's data processing limit can make the actual tool travel speed slower than on ordinary 3-axis machining of straight lines. In other words, the cutting time itself may also be long.

Problem drawings (review advised)

Drawings that specify 5-axis for shapes 3-axis can handle

A simple polyhedron or 2.5D shape whose drawing note says "simultaneous 5-axis machining requested" even though 5-axis is not needed. A production partner may decline the quote, asking why expensive high-end equipment should be tied up on a simple job, or quote an unnecessarily high defensive price.

Perfectly curved bodies with no thought given to clamping

A part cannot be cut floating in the air. 5-axis machining often cuts into every face of the stock, so if the designer provides no holding stock for the vise to grip until the end, or an assembly tab (thread), there is no way to clamp it on the machine and machining itself is impossible.

Designs that collide by ignoring machine kinematics

For the tool to follow a deep surface, the spindle head would have to rotate more than 90 degrees, and the drawing is designed at an angle that collides with the table or vise given the machine structure. Because such a shape exceeds the physical travel limits of a 5-axis machine, the 5-axis machining range should be reviewed at the design stage.

5-axis CNC milling (simultaneous) FAQ

Q. What shapes suit 5-axis CNC milling?
Screws, impellers (turbine blades), aircraft propellers, artificial joints and other 3D free-form surfaces with undercuts, for which 3-axis or 3+2-axis machines cannot generate a toolpath or the tool physically cannot reach, can be produced in a single setup.
Q. Why is 5-axis CNC milling so expensive?
Equipment costs hundreds of millions to billions of KRW, and the labor cost of skilled engineers who can run 5-axis CAM software and manage machine collisions is among the highest in manufacturing. The hourly machine cost is also at least 3 to 5 times that of ordinary 3-axis.
Q. Is 5-axis machining always faster than 3-axis?
No. With five axes moving simultaneously and coordinates computed continuously at the micrometer level, the machine controller's data processing limit can make the actual tool travel speed slower than ordinary 3-axis machining of straight lines.
Q. Which drawings make 5-axis quotes jump?
Typical cases are simple polyhedra or 2.5D shapes marked "simultaneous 5-axis machining requested", and perfectly curved bodies with no thought given to clamping. For the latter, without holding stock for the vise to grip or assembly tabs, machining itself is impossible.
Q. Are there shapes even a 5-axis machine can't physically make?
Yes. For the tool to follow a deep surface, the spindle head would have to rotate more than 90 degrees. A drawing designed at an angle that collides with the table or vise given the machine structure exceeds the physical travel limits (kinematics) of the machine and cannot be machined.

5-axis CNC milling quote from one drawing

Upload STEP or DWG → instant quote → final quote. Analysis through pricing is automated.

Upload a drawing
Title5-axis CNC millingScale1:4Unitmm
FormatA4Date2026-03-12Proj.Sheet1/1
Dwg No.MAKEIT-CNC-5AXISThk12RevA

Related: CNC machining

CNC machining services

Read more