Bending uses a press brake to press plate between upper and lower dies and plastically deform it to the desired angle. It is more durable and better looking than welding. Price is set by number of bends, part size and weight (whether a two-person crew is needed), tooling changes and flat pattern preparation cost.
Process types
V-bending
The most common method. The plate is placed on a V-shaped lower die and pressed with an upper punch to fold it
Hemming / seaming
Folding the plate edge back 180 degrees onto itself (to strengthen the edge and improve safety)
Roll bending / rolling
Passing the plate through three rollers to roll it into a round pipe or a large tank (cylinder)
Press brake bending
Basic concept
How it works
An upper punch (blade) and lower die are set in a large press called a press brake, and the machine presses the plate down with tens to hundreds of tons of force to create permanent (plastic) deformation at the desired angle, usually 90 degrees.
Key difference
Cutting machines cut by themselves once given a drawing, but bending is largely semi-automatic or manual: the operator holds the plate by hand and feeds it into the machine to set the angle. (Robotic bending is growing recently.)
Process characteristics
✔ Minimal welding, maximum quality
Folding one plate 90 degrees is more durable and looks much cleaner than welding two plates together at a right angle.
✔ The fight against springback
After bending, metal tends to partly return toward its original flat state. For example, getting a 90-degree bend may require pressing to 92 degrees, so compensation know-how by material and thickness is needed.
✔ Drawback (tooling interference)
When forming a box, the plate can catch on the machine (punch) structure when folding the last side, making the bend impossible.
Cost structure
(Number of bends × price per bend)
Labor surcharge (two-person crew if large or heavy)
Key cost drivers
① Number of bends (bend count)
Each press of the plate in the machine adds one bend. A U-shape takes 2 presses (2 bends) and a box shape takes 4 presses (4 bends). Price rises in proportion to the count.
② Part size and weight
Plate longer than 2 meters or thick plate is hard for one operator to lift and set at an angle. If a two-person crew is needed, the machining cost roughly doubles.
③ Tooling change cost
Going from bending 1T plate to 10T plate means removing the punch and die in the machine and replacing them with larger ones.
④ Flat pattern preparation cost from elongation (K-factor)
When plate is bent 90 degrees, the outside stretches and the inside compresses. So the flat pattern length before bending must be slightly shorter than the sum of the dimensions after bending. The CAM cost of calculating this and drawing the flat pattern is included.
Bend specifications - minimum bend length and minimum bend radius
Minimum inside bend radius by material (T = sheet thickness)
| Material | Min. inside R | Note |
|---|---|---|
| Mild steel (SS400, SPCC cold-rolled steel) | 0.5 ~ 1.5 × T | Larger for thicker plate |
| STS304 | 1 ~ 2 × T | — |
| STS316 | 2 × T | Larger than 304 |
| Aluminum 5052 | 1 ~ 1.5 × T | Good formability |
| Aluminum 6061-T6 | 3 ~ 6 × T | Watch for cracking |
Grain direction: bending parallel to the rolling grain cracks easily. The values above are for the grain direction, and a smaller R is possible when bending perpendicular to the grain.
Minimum flange (bend allowance): at least 3 to 4 times the sheet thickness. For a 90° bend, about 0.78 times the V-die width is needed.
Hole-to-bend-line distance: keep at least 3 times the sheet thickness plus the bend R so the hole does not distort.
Tolerance: bend angle of ±1° is standard, and with added process control it can be tightened to ±0.5°. Bend dimensions are ±0.25 to 0.5 mm per ISO 2768-m, and accumulate when there are several bends.
Springback: it varies with material, alloy and R/T ratio, so no single value can be given. CNC press brakes usually compensate with 2 to 5° of overbend.
Problem drawings
Ignoring the minimum bend length
If a bend of only 3 mm at the edge is requested, the plate slips out of the lower die (V-groove) and bending is difficult. (Depending on thickness, a bend allowance of at least 10 to 20 mm is needed.)
Holes right next to the bend line
A hole near the fold is pulled as the plate bends and distorts into an ugly oval.
Four-sided boxes designed without considering interference
If a deep, narrow box shape is designed to be folded entirely, there is no room for the punch (blade) and the part is judged impossible to make.
Bending FAQ
- Q. How does bending work?
- An upper punch (blade) and lower die are set in a large press called a press brake, and tens to hundreds of tons of force press the plate to create permanent deformation at the desired angle, usually 90 degrees. Unlike cutting, the operator holds the plate and feeds it into the machine to set the angle, so it is largely semi-automatic or manual.
- Q. What determines the price of bending?
- Each press of the plate in the machine adds one bend, so a U-shape is 2 bends and a box shape is 4, and price rises in proportion to the bend count. If a part is longer than 2 meters or thick and needs a two-person crew, the machining cost roughly doubles, and a thickness change also incurs a tooling change cost.
- Q. What is springback?
- After bending, metal tends to partly return toward its original flat state. For example, getting a 90-degree bend may require pressing to 92 degrees, so compensation know-how by material and thickness is needed.
- Q. Can I place a hole near the bend line?
- A hole near the fold is pulled as the plate bends and can distort into an ugly oval, so avoid it.
- Q. Is there a minimum length for a bend?
- If a bend of only 3 mm at the edge is requested, the plate slips out of the lower die (V-groove) and bending is difficult. Depending on thickness, a bend allowance of at least 10 to 20 mm is needed.
Bending quote from one drawing
Upload STEP or DWG → instant quote → final quote. Analysis through pricing is automated.
Upload a drawing| TitleBending | Scale1:4 | Unitmm | |
| FormatA4 | Date2026-03-12 | Proj. | Sheet1/1 |
| Dwg No.MAKEIT-SHEET-BENDING | Thk12 | RevA | |
